No query specified.

distributor iconDistributor log in

BFM® Non-Breathable Connectors

BFM® fitting's non-breathable connector range suit a wide variety of processing applications, particularly when dealing with very fine powders or where your system relies on pneumatic conveyance methods.

The chart below is a basic summary of our key non-breathable connector range - for more detail, refer to 'Product Specification Summary: Non-Breathable Connectors' document, or you can click on an image below to view the specification sheet for that particular product.  For information on our 'Breathable Connector' range, click here.

 

  Seeflex 020E Seeflex 040E Seeflex 040AS Flexi
  BFM-seeflex-020E BFM-seeflex-040E BFM-seeflex-040AS BFM-Flexi
Material Ether based thermoplastic polyurethane Ether based thermoplastic polyurethane Ether based thermoplastic polyurethane with 
Anti-static infusion

Ether based thermoplastic polyurethane with 316
stainless steel wire coil

Thickness 0.35 mm / 1/64 inch 0.9 mm / 1/32 inch 0.9 mm / 1/32 inch

0.6 mm / 1/32 inch - 0.7mm / 1/32 inch
(depending on diameter)

Temperature Range:        
    Continuous -25 - 80°C/-13 - 176°F -25 - 110°C/-13 - 230°F
 
-25 - 95°C/-13 - 203°F   -20 - 85°C/-4 - 185°F
 
    Surge 100°C / 212°F 120°C / 248°F 100°C / 212°F N/A
Surface Resistance (Ohms) 1010 1010 108 N/A
FDA Approved CFR 177.1680 & 177.2600 CFR 177.1680 & 177.2600 CFR 177.1680 & 177.2600 CFR 177.1680 & CFR 21 177.1550 (adhesives) & 177.2600
3A Certified Yes ( 20- ) Yes ( 20- ) - Yes ( 20- )
EU Approved EC 1935/2004, 2023-2006 & 10/2011 EC 1935/2004, 2023-2006 & 10/2011 - EC 1935/2004, 2023-2006
ATEX Certified Approved for all dust explosion hazardous areas. Some restrictions apply. Approved for all dust explosion hazardous areas. Some restrictions apply. Approved for all dust explosion hazardous areas. Some restrictions apply. -

 


Copyright © 2016 BFM® Global

BFM® Fitting is a trademark of BFM Global Ltd.

Performance website by unfld