No query specified.

distributor iconLog in

Bulk Bag Loader

BFM Bulk Bag Loader

A three-layered, inflatable filling head featuring a stainless steel core fully encased in Seeflex ether-based urethane.

  • Includes external air fitting that plugs into an 8mm pneumatic air line to inflate super strong & flexible outer layer.
  • Top of loader simply snaps into a BFM® fitting spigot and features a fully encapsuIated stainless steel ring to support lower end.
  • Inflates in seconds and seals tight on the neck of bulk bag, eliminating product leaks.
  • Much safer for workers hands as there are no pinch points.
  • Can be used on bulk bags with or without plastic liners.

NB: Pneumatic air-line is recommended to be set to a maximum of 6psi.

Available Sizes:

Diameter (mm): Expands To Fit Bag Neck Sizes (mm): Part No: RRP (NZ$):
Ø250 Ø270 - Ø340 304794 $1,400
Ø300 Ø320 - Ø395 304793 $1,450
Ø350 Ø370 - Ø460

304791

$1,500
Ø400 Ø420 - Ø540 302363 $1,550
Ø450 Ø470 - Ø590 304828 $1,650

(standard length for all diameters is 350mm)

 

The Seeflex material complies with the following regulations: FDA CFR 177.1680 and 177.2600 (EC) 1935/2004, 2023–2006, 10/2011 USDA and 3A (20-). * Tested to ASTM D-257

 

Download the BFM® Bulk Bag Loader Product Spec Sheet here.

Physical Properties

Surface Finish Gloss/Gloss
Hardness (Shore A) 90
Inner Wall Thickness (+/- 10%) 0.9 mm / 1/32 inch
Tensile Strength (MPa) 40
Operating Temp Range -25 to 110˚C  (-13 to 230˚F)
Ultimate Elongation (%) 593
Tear Strength – Die C (N) 67
Surface Resistivity (0hms)* 1010
Air Permeability 0

Copyright © 2021 BFM® Global

BFM® Fitting is a trademark of BFM Global Ltd.

Performance website by unfld