Flexible Connectors

Seeflex 020E
Connector

Our lightest connector made of clear, lightweight ether based thermoplastic polyurethane alloy, mainly used for weigh-scale type applications.

Product Description

Seeflex 020E is a clear, lightweight ether-based thermoplastic polyurethane alloy, mainly used for weigh-scale type applications.

Application

Designed for weigh-scale type applications.
Ideal for applications where Seeflex 040E is not flexible enough.
The Seeflex 020E Connector is the thinnest Seeflex connector in the BFM^® range.

Key Features

Lightweight, transparent Seeflex media, specifically designed for load and weigh scale type equipment

Also excellent for applications with vertical movement as it is particularly flexible

Ideal for feed chutes using optical level sensors (thinner, transparent connector walls)

Seeflex 020E is strong and will not fracture as a result of constant flexing

Conditions and Compliance

View Specifications below for full details and restrictions.

Seeflex 020E
Images

Specifications

Specifications Sheet

Physical properties

Material/Fibre

Seeflex - Ether-based thermoplastic polyurethane

Colour

Transparent

Construction/ Finish

Gloss/Gloss

Wall Thickness (+/- 10%)

0.35mm / 1/64 inch

Breathable

Hardness (Shore A)

Tensile Strength (MPa)

Elongation (100%)

8.3

Elongation (300%)

18.4

Ultimate Elongation

644

Tear Strength – Die C (N)

100% Modulus (MPa)

8.3

Dust tight?

Yes

Maximum Number of Rings (on a single connector)

Operating Conditions

Max. Operating Temp

80ºC / 176ºF

Operating Temp Range

- 25 to 80°C / - 13 to 176°F

Surge Temp

100°C / 212°F

Low Temp / Flexibility

Good

Surface Resistivity (0hms)*

10¹⁰ (Tested to ASTMD-257)

Air Permeability

Max. Operating Pressure

0.10 bar / 1.5 PSI (for temp. to 90˚C / 195˚F measured on a static Ø200mm x 200mm long connector). We recommend using the shortest possible connector for applications where increased pressure and/or high temperature is expected.

Vibration

Yes

Oscillation

Yes

Compression

Yes

Certification and Compliance

FDA and USDA

FDA 21 CFR 177.1680 & 177.2600 and USDA

3A Certified

Manufactured from 3A 20-27 certified Seeflex Material and the BFM® cuff and spigot system is a 3A certified 63-04 sanitary fitting.

EU Approved

(EC) 1935/2004, 2023–2006 & 10/2011

Atex Certified

IBExU tested. Approved for all dust explosion hazardous areas. Some restrictions apply.

Dimensions

Available Diameters

Ø100mm (4"),
Ø125mm (5"),
Ø150mm (6") through to Ø1,650mm (65") in 50mm (2") increments.

(max. diameter with SS rings is 500mm, Tool Release is 650mm plastic rings is 1,000mm)

Applicable Connector Lengths

80mm (3"),
100mm (4") to 6,000mm (19ft 8") in 50mm (2") increments.

(min. length for all with rings is 150mm).

Options

Available with SS Rings? (min. length for all is 150mm)

(on request only)

Available with Plastic Rings? (min. length for all is 150mm)

(on request only)

Available as Tool Release?

Yes to Ø650mm

Available as Tapered?

Yes

Available as a one ended Connnector?

Yes

Quick Access Port Option?

MSDS - Seeflex 020E (GHS)

MSDS - Seeflex 020E (EU)

Getting Started with BFM® fittings

We have Authorized Distributors who will help work through what you want to achieve and how BFM® fitting can improve your plant.

Find Your Local Distributor

Product Options

Rings
Tapered
Tool Release

Rings

Tapered

Seeflex 020E is available as a tapered version where different entry and exit diameters are required.

Also often used as a simple hopper solution.

Find out more about Tapered Connectors

Tool Release

For added security, this option has a significantly firmer snap-band that makes it virtually impossible to remove by hand and requires a specially shaped tool.