Skip to content
Explosion Testing Seeflex 040E-600x400px (1)
  1. Home
  2. Applications
  3. Pressure
Applications

Pressure

Title Line

Operating under pressure can be problematic

Title Line

For process lines operating under pressure, keeping product inside the process poses various challenges, especially around dust control and connector failure.

Old-style connectors, particularly clamp bands, are prone to failure as pressure within the sleeve increases. They are also prone to continuously leaking product which creates a messy and unhygienic environment.

What's the solution? BFM® fitting, the only flexible connector system that is installed on the inside of the pipe, can prevent product leaking at transition points in the machinery.

Milk plant leaking powder - Before BFM 500 x 349

 

BFM® fitting performs better under pressure

Title Line

BFM® fittings are probably the most pressure resistant form of flexible connection available in the world.

The BFM® connector’s internal seal is proven to withstand far higher pressures than clamped connectors without leakage. In fact, our patented spigot and snap-in blue band connector system mean any internal pressure just pushes the cuff of the connector harder against the walls of the spigot, creating an even tighter seal.  

There is nowhere for product to leak or build-up as there are no crevices on the outside of the pipe for it to escape to.   

Our Seeflex 040E connectors have been pressure tested to safely perform under constant pressures of up to 5PSI (34.5kPa,  .345Bar), and explosion pressures of over 9.14PSI (63kPa, .63Bar).

View Product Testing

 

 

BFM Pressure video_Pink Powder_V2.mp4-low

 

 

Advantages of BFM® fitting with Pressure

Title Line

The BFM® fitting flexible connector system is made with high-quality materials designed to minimize connector failure that can occur due to overpressure situations.

BFM® No Product Loss Icon in Blue
No Product Loss

The BFM® fitting design is, 100% dust-tight, eliminating product leakage. The seal becomes tighter when there is more pressure in the system. 

BFM® Explosion Resistant Icon in Blue
Explosion Resistant

Proven to contain initial explosions, BFM® fittings also help eliminate dust leakage into the plant, reducing the risk of secondary explosions. 

BFM® Durable Icon in Blue
Durability

Superior materials, like our unique Seeflex urethane, and pressure-resistant design mean BFM® connectors are stronger and last much longer.

BFM® Regulatory Compliance Icon in Blue
Regulatory Compliance

Our wide range of products have been independently tested to conform to important global standards like ATEX, 3A, USDA, FDA &  EC.

Pressure Resistant Seeflex 060ES

Title Line

Our high-pressure resistant Seeflex 060ES connector can operate comfortably up to 24PSI* (170kPa, 1.7Bar) of continuous pressure.

The secret to the success of the product is in its make-up: a polyester scrim is internally bonded between layers of Seeflex (an ether-based polyurethane).

The polyester scrim restricts the Seeflex and stops it from expanding, providing superior pressure resistance and can be used in all food-contact applications. 

View Seeflex 060ES
Seeflex 060ES-400x300px

 

Getting Started with BFM® fittings

Title Line
Get in touch with one of our local Authorized BFM® fitting Distributors to help find the right solution for you. They will help work through what you want to achieve and how BFM® fitting can improve your plant.
Contact a Distributor
Generic BFM Background Banner Image Mock-up (1)

Adding Rings Increases Pressure Resistance

Title Line

If you still want the full visibility of your product flow afforded by a Seeflex 040E connector but want to add some additional pressure resistance, a simple way is to add support rings.

Each ring acts as an additional point of resistance and will allow you to operate at higher pressures.

 

Find Out More About Rings

Pressure - Seeflex 040E with 2 rings & blue dot

 

How BFM® created a dust-free work environment that is "a pleasure to work in"

Title Line

A leading New Zealand dairy plant had a major challenge with hygiene in their blending filler room. A vibratory discharging cone was connected to the hopper via a traditional connecting sock and steel clamps.

Regular gas purging of the system forced powder through small gaps in the old-style sock and steel clamp connector. There was excessive dust leakage and product build-up in the joins – a major hygiene issue.

Since installing the BFM® fitting system, the room is clean and there has been a significant reduction in both downtime and replacement costs.

View Case Study
Pressure case study Before & After pics

 

Find out what's happening at BFM® fitting

Title Line

BFM® fitting is transforming processing plants globally. Keep updated on news, products, insights and new product developments.