LM3

No, we only produce actual connectors out of these fabrics, not caps.

Yes, the silicone is post-cured which makes it food grade.

Yes – both CIP and manual washing is possible. Refer to the washing guidelines for Seeflex and Woven connectors.

For vacuum, the best way to keep the connector ‘open’ is to use SS Rings (This is generally only possible with connectors over 100mm long). Refer to the ‘BFM^® Limitations: Negative Pressure’ document for more information. Another option is to use fabric connectors, such as the LM3 or LM4 which ‘breathe’ and filter air into the system. Refer to the ‘BFM^® Limitations: Negative Pressure’ document for more information.

Yes. The LM3 is made from pure polypropylene and works well in very low temperatures. We have many connectors currently operating in low temperature applications and they remain flexible.

Yes – our FM1 breather bag is used when you have a vessel that you are trying to fill and need to vent air. The LM4 or LM3 connector can also be used if you require your BFM^® fitting (connector) to breath, often due to pressures. The LM3 breathes more air than the LM4, but could also bleed more product. This will depend on pressure, product, application and conditions.

FM1 breather bags are available in lengths from 100mm (4") to 1 metre (3ft 3").

Seeflex 040E, Seeflex 040AS, LM4, LM3 and TEFLEX can all be supplied with rings. Seeflex 020E may be supplied on request, but Camlon connectors, Kevlar covers and Blackout Covers, cannot be supplied with rings.

Yes – LM3 is perfect for this application as it can operate comfortably down to -70 degrees C (-94 degrees F). However, we recommend a separate FM1 Breather Bag installed elsewhere in the system to handle the breathing/venting of the air. In other words, although the LM3 is air permeable, it needs to act as a connector, otherwise it may become clogged.