Product Description

Title Line

The flame retardant Kevlar Cover fits over existing connectors and is typically used in over pressure and potentially explosive applications to reduce the risk of fire.

Application
  • Used in over pressure and potentially explosive applications.

  • Designed to fit over existing connectors.

  • Very easy to install and remove, no tools required.
Key Features
tick for web-light blue-60x60px


Fits over our entire connector range

tick for web-light blue-60x60px


No tools required when installing or removing cover

Physical properties
Material/Fibre
Kevlar (Aramid) and the wire used for the holders is 6mm 304 stainless steel
Colour
Yellow
Construction/ Finish
Multi-filament plain weave, Scoured and heat set
Weight
447 g/m2 / 13.2 oz/yd2
Breathable
Yes
Minimum Tensile Strength (kgf/25mm) (measured as a force over a 25mm wide Ravel Strip)
Fabric Warp 700 Filling 704 (±58 kgf) (Test Standard: ASTM 5035). (measured as a force over a 25mm wide Ravel Strip)
Dust tight?
No
Operating Conditions
Max. Operating Temp
260°C / 500°F Continuous
Surge Temp
300°C / 572°F (NB: Limited to max. operating temp of inner connector)
Surface Resistivity (0hms)*
1010
Vibration
Yes
Oscillation
No
Compression
Yes
Certification and Compliance
FDA and USDA
FDA 21 CFR 177.1632
3A Certified
No, however the connector used with the cover may be 3A certified.
Atex Certified

IBExU tested. Approved for all dust explosion hazardous areas. Some restrictions apply.

Dimensions
Available Diameters
  • Ø100mm,
  • Ø125mm,
  • Ø150mm - Ø1,650mm (in 50mm increments)
Applicable Connector Lengths
  • 80mm (3"),
  • 100mm (4") to 1,000mm (3ft 3") in 50mm (2") increments
Options
Available as Tapered?
Yes

Getting Started with BFM® fittings

Title Line

We have Authorized Distributors who will help work through what you want to achieve and how BFM® fitting can improve your plant.

Kevlar Cover Applications

Title Line
BREATHABLE LM4 CONNECTOR WITH A KEVLAR COVER CONNECTING AN AIR-HEATER FOR DRYING COFFEE WITH HOT AIR, SWITZERLAND.

LM4 with Kevlar Cover in Coffee Production

Breathable LM4 connector with a Kevlar Cover connecting an air-heater for drying coffee with hot air, Switzerland.


Seeflex 040E with kevlar Cover used at base of limestone silo - under constant pressure.

Limestone Processing

Seeflex 040E with Kevlar Cover used at base of limestone silo - under constant pressure

 

Tips and Guides

Title Line

For some useful technical tips and information get you started with selecting the BFM® fitting system.

Installation Process

Title Line

Helpful information for the entire installation process, from measuring up for the initial welding of your spigots to snap-fitting your connectors.

Contact Us

Title Line
If you would like to discuss your unique application, please contact us and we'll help find a solution for you.