BFM® fitting's distributors are always busy sharing the benefits of the 100% sealed, snap-fit flexible connectors to the world. Here’s a round-up of BFM® fitting on show at recent trade shows.
To find out if BFM® will be on show at a Tradeshow near you, check out our International Tradeshow Calendar.
Our Chinese Distributor, Emborio, was a recent sponsor and exhibitor at the 'Chemical Green Processing Asia 2018' Summit in Shanghai.
The show featured the latest technology and products in the chemical industry and looked at topics such as sustainable growth, process and production safety an innovative approach to green chemistry.
Swedish Distributor Filtex AB had some very positive feedback and good interest in the BFM® products on show at Northern Europe's largest trade fair in operation and maintenance held in Gothenberg.
Over 10,000 visitors from a variety of industries attended the show. (Pictured rom left: Nichlas (MD), Tomas, Daniel, Morgan (from BFM), Jonas and Joakim from Filtex AB).
Our Swiss Distributor Swissfilter had an innovative stand at the 'Solids' show in Zurich, held on the 12-13th February, with some BFM® branded Swiss-chocolate to give away (see left - held by Swissfilter's Jan Rudolf von Rohr).
The chocolate manufacturer does actually use BFM® in their production line so it was a great tie-in!.
It was a very focused show for the solids/powder industry and there were many quality visitors to the stand.
Chupinpack, BFM®'s French Distributor, recently attended the VRAC TECH show held in Le Mans from 28 - 30 November.
This bulk products management show attracted over 3000 highly-qualified industry professionals who arrived from all corners of France looking for solutions to their problems.
Chupinpack had a team of 9 manning their two impressive stands at the show.
BFM®'s New Zealand Distributor, Filtercorp, recently had a display at the National Maintenance Engineering Conference held in Hamilton.
They were one of the sponsors of the social evening for participants and they decided to run a little competition to see who could remove and replace a 200mm BFM® connector the fastest - with the prize being a 49" smart TV!.
A lot of fun was had by all, and the lucky winner was Thinus from Asaleo with an impressive time of 8.05 seconds.
FoodTech Eurasia is the one of the biggest, most comprehensive and effective trade fairs for food processing and safety of the Eurasian region.
It presents the latest in food processing, food storage and transporation, food additives and food hygiene and this year, BFM®'s Turkish Distributor, Toztek had a large stand at the show.
POWTEX is the biggest exhibition specialized for the powder process equipment and technology in Japan. Produced in cooperation with the Japanese Society of Powder Technology, this was the 12th year for the show and there were over 200 companies at 600 booths on display.
BFM® fitting was well represented at this year's POWTEX with both Aishin Industrial (left) and JP Next having stands at the show.
The world leading trade fair for processing, analysis, and handling of powder and bulk solids. Once again BFM® was well represented at the show by two of our European Distributors - Walter Cleaning Systems (Germany - left) and JP Airtech (Denmark - right).
BFM® fitting's Technical, Product & Compliance Manager Miles Henderson (middle) was joined by our two new Canadian Distributors at the recent Powder & Bulk Solids Show in Toronto recently. Pictured with Miles are Roy Rattos (left) and Jonathan Rattos (right) from Toronto based Distributor Rate Technology Systems. Montreal-based HiTech Piping (HTP) also helped out on the stand which was well received by attendees.
Shüttgut is Switzerland's leading tradeshow for granules, powder & bulk solids technologies.
Held in Basel from the 15-17 November, BFM®'s local Distributor Swissfilter, had a stand at the show.
Held in conjunction with the EHEDG Global Congress in Denmark, FoodTech is Northern Europe's largest trade fair for the food industry.
JP Airtech had a stand at the show and Morgan Ternow, BFM's Business Development Manager for Europe (far left) was also at the show to lend a helping hand.
This four day event, held at the Jakarta International Expo (JIExpo) in Indonesia, showcased technology, machinery, materials system & supplies for the food & beverage and pharmaceutical processing & packaging industries.
BFM® distributors RAP Engineers and PT Airlock Indonesia Jaya Raya were proudly displaying and demonstrating BFM® fitting and received a lot of interest from show attendees.
BFM® fitting Distributors Powder Solutions Inc. (left) and Siftex both had stands at the biggest, most comprehensive event in the U.S. for the grain-based food industry, IBIE 2016. Held from 8 - 11 October at the Las Vegas Convention Centre, IBIE brought together more than 20,000 baking professionals from 100 different countries and every segment of the business.
Bringing Manufacturing Home was a key theme at EMEX 2016 when New Zealand’s leading engineering, manufacturing, innovation and technology trade event came to Auckland from 31 May to 2 June. The bi-annual showcase for industry innovations to manufacturers, engineers and electronics professionals for over 30 years, EMEX is New Zealand's principal national manufacturing exhibition, and distributor Filtercorp reported very good interest in BFM® fitting at the show.
11,834 visitors found their way to China’s most international exhibition for the process industries, AchemAsia in Beijing in mid-May.
AchemAsia is the international platform for chemical engineering and process engineering in China and BFM®'s Chinese distributor Emborio had a presence displaying BFM® fitting, amongst 295 exhibitors at the show.
Mexico City was once again host to the 2016 ExpoPack exhibition in Mexico, and BFM® distributor MexTrade International were on hand to demonstrate the BFM® fitting system to the more than 25,000 customers/buyers from over 30 countries who attended the show.
The show ran from 17 - 20 May 2016 and attendees included packaging and processing professionals from a wide range of industries, including food, beverage, pharmaceutical, personal care, graphic arts, chemical, electronics, textiles and automotive.
North America’s largest and longest-running powder show celebrated 40 years of bringing the world’s processing and bulk material handling industry together. More than 3,300 industry professionals attend this three-day event—top level engineers and executives who select vendors, specify products, and control budgets in companies across major manufacturing industries.
BFM® Distributor Powder Solutions Inc. had a stand at the show proudly displaying BFM® fitting.
Walter Cleaning Systems had BFM® fitting on show at the premiere global process and bulk solids community event, POWTECH 2016 from 19 - 21 April.
A total of 891 exhibitors from 31 countries showcased innovations for new and more efficient production processes, and this year's show was a big success, with more than 7% growth in visitor numbers over the previous year.
BFM® fitting's United Kingdom distributor ProSpare attended the Foodex 2016 show held in Birmingham from 18 - 20 April 2016.
Foodex is the UK’s premier trade event for the food and drink processing, packaging, ingredients and logistics industries.
Normicom, BFM® fitting's Italian distributor to the Pharmaceutical industry recently had a stand profiling our product range at Pharmintech 2016, from 13 - 15 April in Bologne, Italy.
The triennial trade fair is dedicated to the technology supply chain for the pharmaceutical, parapharmaceutical, nutraceutical and cosmeceutical industry.
Over 1,400 exhibitors, most (over 90%) of whom were manufacturers, were at the 25th Food Ingredients China exhibition in Shanghai from the 23 - 25th March 2016. The show is organised by the Food Additives Association (CFAA) , the only registered nationwide food additive and ingredients industry organization approved by the government. It covers over 23 categories of food additives, 35 categories of food ingredients and 14 categories of processing aids. BFM® fitting's Chinese distributor Emborio had a stand profiling our product range at the show.
New Heat and Chemical Resistant Teflex NP
Morgan On The Road
Achema 2018 Another Success