No query specified.

distributor iconDistributor log in

Spigot

Spigot

The BFM® spigots are available in Stainless Steel T316 and T304, as well as C22 Hastelloy. They are available in a range of exact sizes, eliminating the imprecise nature of hose-clamp sleeve type connection widths and ensuring a perfect fit with the BFM® connector.

 

Key features:

  • The spigot design is slightly tapered, so the OD at the top of the tail is 5mm / 13/64”  greater than the base
  • BFM® spigots have a tail 52mm (2”) long. These can be easily cut down or cut on an angle to suit your existing pipework.
  • To enable the installation of a TR (Tool Release) connector, a 6mm / 15/64” hole is drilled in the top ridge of the spigot head.


Note: For applications where there is a possibility for static build up, e.g. wood dust, flour, milk powder etc., we recommend using a static dissipative wire (strip), connecting the two BFM® spigots together.

 

Download the Spigot Product Spec Sheet

Physical Properties

Material Stainless Steel T316
Stainless Steel T304
C22 Hastelloy
Interior Finish 0.8Ra micro-metres (32Ra micro-inches)
Wall Thickness Ø 100mm / 4" =  1.5mm / 1/16"
Ø 150mm / 5" upwards = 2.0mm / 5/64"
Available Diameters (Stainless Steel) 100mm, 125mm, 150mm then in 50mm increments up to 1,650mm
4", 5", 6" then in 2" increments up to 65"
Available Diameters (Hastelloy) From 150mm up to 500mm in 50mm increments
From 6" up to 20" in 2" increments

Copyright © 2016 BFM® Global

BFM® Fitting is a trademark of BFM Global Ltd.

Performance website by unfld