No query specified.

distributor iconLog in

Seeflex 060ES

Seeflex 060ES

Pressure-resistant Seeflex 060ES is a clear, ether-based thermoplastic polyurethane alloy with an internal polyester scrim.

The internally bonded scrim restricts the Seeflex sleeve from stretching and provides superior pressure resistance.

Complies with:

Seeflex complies with the following regulations: FDA 21 CFR 177.1680 & 177.2600, USDA & 3A (20-), (EC) 1935/2004, 2023–2006 & 10/2011

Key features/uses:

  • The BFM® Seeflex 060ES connector is only used for overpressure situations for continuous pressure up to 1.3 bar (tested on a static 200mm diameter x 200mm long connector *)

  • IMPORTANT NOTE:   Seeflex 060ES is designed to resist extremely high pressure and therefore it should not be used where the connector is intended to act as a pressure-release point.


* Engineering adjustments should be made for changes in diameter.  For length adjustments or non-static applications, contact BFM®.

Available Sizes:

Diameters: Ø100mm (4"), Ø125mm (5"), Ø150mm (6") through to Ø1,650mm (65") in 50mm (2") increments

Lengths:  80mm (3"), 100mm (4") then in 50mm (2") increments up to 1,000mm (3ft 3")

NB: Some length restrictions apply for connectors over Ø650mm and diameter/length restrictions apply for those with Tool Release options. Refer to the Quick Reference Limitations Summary for more information.

 

Download Seeflex 060ES Product Spec Sheet

Physical Properties

Wall Thickness (+/- 10%) 1.3mm (3/64 inch)
Tensile Strength (MPa) 47
Max. Operating Temp 120ºC / 248ºF
Low Temp Flexibility Good
Elongation (100%) 12.5
Elongation (300%) 16
Available Diameters Ø100mm, 125mm then 150mm - 1,650mm (in 50mm increments)
Weight 1,220g/m2 / 43oz/yd2
Permeability 0

Copyright © 2021 BFM® Global

BFM® Fitting is a trademark of BFM Global Ltd.

Privacy Policy

Performance website by unfld